| Industrial lubricants – Synthatic and paraffil based. |
| |
| |
| GREASES |
| |
| Chain & Cable |
| |
|
Wire life Alma sol coating Grease (451-453)
Wire life Alma sol is soft, semi fluid formulation designed to coat all moving chain and cable parts to ensure smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts and to seal out damaging moisture. Available in two NLGI grades, Wire life Alma sol Coating Grease contains Alma sol, LE's exclusive wear-reducing additive that is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances.
|
|
| |
| 1232ALMATEX |
|
General Purpose Lubricant
For friction and anti friction bearings, chassis point, other grease lubricated applications. Semi tacky resists washout, shock loading, and pound out. |
| |
| 1250-1251 ALMASOL |
|
High Temperature Lubricant
Wherever high temperature grease is required such as klin car bearing, Vern conveyers, asphalt plants, soot blowers, etc |
| |
| 1274-1275 ALMAPLEX |
|
Industrial Lubricant
Extreme pressure lubricant for Industrial or fleet use in several operations caused by moisture or high temperatures. Seals out dirt, water and prevents corrosive wear. Great for electric motors and central lubrication systems. |
| |
| 3750-3752 ALMAGARD |
|
Vari Purpose Lubricant
Multi functional extreme pressure for extended service under extreme conditions in on and off road vehicles and in many inplant applications. Very tracky, excellent water resistance. Will not pound out. Rust and corrosion inhibited. |
| |
| 4622 MONOLEC MULTIPLEX |
|
Lubricant
Lithium complex extreme pressure grease meets NLGI GC –Lb Specification. For plain and anti friction bearings. Excellent low temperature pumpability. Good mechanical stability, high dropping point, corrosive resistance. |
| |
| 4708-4702 MONOLEC |
|
Industrial Lubricant
For centralized lubrication systems. EP characteristics, water resistance, high heat resistance, low separation or “bleed” excellent mechanical stability and easily pump able. |
| |
| 9102SYNTEMP |
|
Synthetic lubricant
Use of small gears, chains, cables, sprockets, slides and other applications. Clean and easy to apply. Very tracky water resistant, and resists high temperature.
NLGI 0 when applied, NLG1 2 When diluent evaporates. |
| |
| OPEN GEAR LUBRICANTS |
| |
| Open Gear |
| |
 |
|
| |
| 9000-9001 PYROSHIELD SYN GEAR LUBRICANT |
|
| Advanced lubricant technology providing unique synthetic lubricants for shrouded open gears and other open gears of similar application. LE'S PYROSHIELD® Syn-Gear Lubricants have been formulated to provide heavy synthetic fluids designed to withstand heavy shock loading. |
| |
| 9011 PYROSHIELD XH SYN GEAR LUBRICANT |
|
| Advanced lubricant technology providing unique synthetic lubricants for shrouded open gears and other open gears of similar application. |
| |
| 5100-5182 PYROSHIELD |
|
| For operating in the most severe service, extreme pressure, for year round use on open gears, cams, cables, fifth wheels and other sliding mechanisms. |
| |
| 1250-1251 ALMASOL HIGH TEMP LUBRICANT |
|
| Designed to provide constant lubrication of bearings at high temperatures where ordinary lubricants would melt and run out. The bearing lifesaver for high temperature applications. |
| |
| 1299 ALMAPLEX ULTRA SYN LUBRICANT |
|
| Engineered to provide optimum performance capabilities under extreme equipment operating conditions. The ultimate heavy-duty synthetic grease. |
| |
| 9120- SYNTEMP SYNTHETIC LUBRICANT |
|
| Unique, heavy-duty, spray lubricant for open gears, chains, cables, sealed bearings and slides. Withstands high temperatures, won't sling off. In a convenient aerosol can. |
| |
| 9901 ALMASOL SYNTEMP LUBRICANT |
|
| Heavy-duty synthetic lubricant specifically designed for high temperature applications. Specially formulated to provide exceptional protection at temperatures at which petroleum oils would completely oxidize (or carbonize). |
| |
| High temperature extreme pressure synthetic lubricant. Water resistant, will not melt or separate. For Open gears. Sliding surfaces, low speed plain bearings. |
| |
| ENCLOSED GEAR LUBRICANTS |
| |
| 300MONOLEC |
|
| Industrial Lubricant
Exceptionally adhesive, on foaming extreme pressure oil with good water separation characteristics. Excellent oil viscosity for general machine applications and gearboxes. |
| |
| 401 ALMASOL |
|
| Pure Mineral Gear Lubricant
Provides the most wear reduction possible without EP Additives. Contains rust and oxidation inhibitors, metal adhesive additives. On foatimg.
SAE 90 |
| |
| 460 and 680 ALMASOL |
|
| For worm gearboxes that require a compounded worm gear lubricant. |
| |
| 604-609 VARI PURPOSE GEAR LUBRICANT |
|
| For heavy duty service in transmissions.differentials and industrial gearing. Extreme pressure long lasting, water resistant non-foaming, very adhesive. Protects against corrosive wear, reduces overheating. |
| |
| GEAR LUBRICANT |
- EP GEAR LUBRICANT
- ALL CLIMATE GEAR LUBRICANT
- GEAR LUBRICANT
|
| INDUSTRIAL OILS |
- HYDRAULIC OIL
- TURBINE OIL
- PAPER MACHINE LUBRICANT
- CENTRIFUGAL COMPRESSOR OIL
- ROCK DRILL OIL
- WAY LUBRICANT
- REFRIGERATION OIL
- SYNTHETIC INDUSTRIAL OIL
|
| ENGINE OILS |
- ALL PURPOSE NATURAL GAS ENGINE OIL
- TWO CYCLE ENGINE OIL
- ULTRA BLEND ENGINE OIL
- GFS ENGINE OIL
|
| TRANSMISSION FLUID |
- LE-CD TRANSMISSION FLUD
- AUTOMATIC TRANSMISSION FLUD
- POWER FLUID
|
| FUEL SUPPLEMENT |
- HEAVY DUTY CHEMICAL SUPPLEMENT
- DIESEL FUEL IMPROVERS
|
| WIRE ROPE LUBRICANT |
- OPEN GEAR
- FOOD GRADE
- CHAIN AND CABLE
- HIGH TEMPERATURE
- HIGH PRESSURE
|
| |
| Wire Rope |
| |
 |
|
| |
| Wire life MONOLEC PENETRATING LUBRICANT (2001) |
Excellent corrosion resistance and high load wear index. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wire life Alma sol Coating Lubricant, maximum protection and wear reduction is achieved.
It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Wire life Monolec Penetrating Lubricant contains Monolec, LE's exclusive wear-reducing additive that creates a single molecular lubricating film on metal surfaces; vastly increase film strength without affecting tolerances. |
| |
| Wire life ALMASOL COATING LUBRICANT (2002) |
A fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust - even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wire life Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.
In addition to its primary function as a coating, it also provides moderate penetration - depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water. Wirelife Almasol Coating Grease contains Almasol, LE's exclusive wear-reducing additive that is attracted to metal surfaces, forming a microscopic layer but not building on itself or affecting clearances. |
| |
| |
 |
| |
| Back |
Next |
